|
Danger Den NV 8800GTX GPU Block - SLI Prep'd
Ref: 567
The DD-8800GTX is designed to provide maximum cooling
for the NVIDIA GeForce 8800 GTX Video Cards
Danger Den and BFG Technologies worked together to bring a top of the line
watercooling product to the 8800 GTX.
New Features :
- Compatible with Reference Design 8800 GTX Video Cards (BFG, EVGA, XFX,
PNY, etc).
- Uses the Additional RAM Pad mounting point for maximum mounting contact
- Lower profile design to allow use of PCI slots on the top side of the block
- New hold down design to allow the use of the PCI slot on the backside of
the card.
- Cools all 26 heat generating points on the card - GPU, RAM, Voltage Regulators,
I/O Chip
- Available from BFG
Technologies assembled and with the True Life Warrenty
Includes:
- Complete Block Assembled with Delrin Top, and Gaskets
- High Flow G 1/4 1/2" or 3/8" OD Fittings and additional SLI Fitting
- Prepped for SLI Design
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
- Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold
Down Materials, Themal Pads, and Ceramique.
- Please leak test 24hrs upon receipt.
- Verify secure mount 48hrs after installation.
- Never reuse Air Heatsink Thermal Pads just use the supplied ceramique
on the RAM and GPU
Options:
Resources:
» Manufacturer's Spec
(Opens in New Window)
Price:
£76.50 exc VAT
(£87.98 Including VAT at 15%)
Choose Barb Size
|
|
OUT OF STOCK
CATALOG SUSPENDED
|
|
|
|
Danger Den NV 8800GTS GPU Block - SLI Prep'd
Ref: 269
The DD-8800GTS is designed to provide maximum cooling
for the NVIDIA GeForce 8800 GTS Video Cards
New Features :
- Compatible with Reference Design 8800 GTS Video Cards (BFG, EVGA, XFX,
PNY, etc).
- Uses the Additional RAM Pad mounting point for maximum mounting contact
- Lower profile design to allow use of PCI slots on the top side of the block
- New hold down design to allow the use of the PCI slot on the backside of
the card.
- Cools all 26 heat generating points on the card - GPU, RAM, Voltage Regulators,
I/O Chip
Includes:
- Complete Block Assembled with Delrin Top, and Gaskets
- High Flow G 1/4 1/2" or 3/8" OD Fittings and additional SLI Fitting
- Prepped for SLI Design
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
- Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold
Down Materials, Themal Pads, and Ceramique.
- Please leak test 24hrs upon receipt.
- Verify secure mount 48hrs after installation.
- Never reuse Air Heatsink Thermal Pads just use the supplied ceramique
on the RAM and GPU
Options:
Resources:
» Manufacturer's Spec
(Opens in New Window)
Price:
£36.50 exc VAT
(£41.98 Including VAT at 15%)
Choose Barb Size
|
|
CATALOG SUSPENDED
|
|
|
|
Danger Den DD-GX2 - 7950 Gx2 Series
Ref: 163
- Compatible with the 7950 GX2 Video Cards
- Compatible in QUAD-SLI setups!!
- Uses the Additional RAM Pad mounting point for maximum mounting contact
- Lower profile design to allow use of PCI slots on the top side of the block
- New hold down design to allow the use of the PCI slot on the backside of the card.
Includes:
- Complete Block Assembled with Lucite Top, Delrin/Acetal Mid Plate, Copper Bases, and Gaskets
- High Flow G 1/4 1/2" or 3/8" OD Fittings and additional QUAD-SLI Fitting.
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
- Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
- Please leak test 24hrs upon receipt.
- Verify secure mount 48hrs after installation.
Options:
Resources:
Images:
   
Instructions
  
» Manufacturer's Spec
(Opens in New Window)
Price:
£102.00 exc VAT
(£117.30 Including VAT at 15%)
Choose Barb Size
|
|
CATALOG SUSPENDED
|
|
|
|
Danger Den Koosah GPU Block - SLI Prep'd
Ref: 441
The Koosah is designed to provide maximum cooling for the Nvidia 7800 and 7900 series allowing significant overclocks.
New Features :
- Compatible with the 7800/7900 GT & GTX Single and SLI configurations!
- Lower profile top and stainless steel holdowns now allow use of PCI slots on either side of the card!!
- Uses the Additional RAM Pad mounting points for maximum mounting contact
Includes:
- Complete Block Assembled with Top and Gaskets
- High Flow 1/2" or 3/8" OD Fittings
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Down
- Hand Lapped
- Pressure tested before shipment
Includes - Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation.
NOTE:
New: Compatible with the 7900GT and GTX single and SLI series
NOT compatible with the GS series video Cards
Resources:
» Manufacturer's Spec
(Opens in New Window)
Price:
£59.00 exc VAT
(£67.85 Including VAT at 15%)
Choose Barb Size
|
|
CATALOG SUSPENDED
|
|
|
|
Single PCI-Slot Backplate for 8800 Series Cards
Ref: 52
Replace the 8800GTX or 8800GTS Double Slot PCI bracket with a Single Slot PCI bracket. This will allow the use of any additional slots on either side of the video card.
Price:
£2.99 exc VAT
(£3.44 Including VAT at 15%)
CATALOG SUSPENDED
|
|
|
|
DangerDen NV78 7800 GPU SLI KIT Rev 1.1 - for 512Mb Cards (1/2") **CLEARANCE**
Ref: 591
The NV-78 is designed to provide maximum cooling for the Nvidia 7800/7900 series allowing significant overclocks
New Features :
- Uses the Additional RAM Pad mounting points for maximum mounting contact
Includes:
- 2x Complete Blocks Assembled with Top and Gaskets
- High Flow 1/2" or 3/8" OD Fittings
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
Includes - Complete Block Assembled with Top, Gaskets, and FIttings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation.
Resources:
» Manufacturer's Spec
(Opens in New Window)
Price:
£64.00 exc VAT
(£73.60 Including VAT at 15%)
Choose Barb Size
|
|
CATALOG SUSPENDED
|
|
|
|
DangerDen NV78 7800 GPU Block Rev 1.1 - SLI Prep'd (1/2") **CLEARANCE**
Ref: 593
The NV-78 is designed to provide maximum cooling for the Nvidia 7800/7900 series allowing significant overclocks
New Features :
- Uses the Additional RAM Pad mounting points for maximum mounting contact
Includes:
- 1x Complete Block Assembled with Top and Gaskets
- High Flow 1/2" or 3/8" OD Fittings
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
Includes - Complete Block Assembled with Top, Gaskets, and FIttings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation.
Resources:
» Manufacturer's Spec
(Opens in New Window)
Price:
£35.00 exc VAT
(£40.25 Including VAT at 15%)
Choose Barb Size
|
|
CATALOG SUSPENDED
|
|
|
|
DangerDen NV78 7800 GPU Block Rev 1.1 (1/2") **CLEARANCE**
Ref: 610
The NV-78 is designed to provide maximum cooling for the Nvidia 7800/7900 series allowing significant overclocks
New Features :
- Uses the Additional RAM Pad mounting points for maximum mounting contact
Includes:
- 1x Complete Block Assembled with Top and Gaskets
- High Flow 1/2" or 3/8" OD Fittings
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
Includes - Complete Block Assembled with Top, Gaskets, and FIttings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation.
Resources:
» Manufacturer's Spec
(Opens in New Window)
Price:
£35.00 exc VAT
(£40.25 Including VAT at 15%)
Choose Barb Size
|
|
CATALOG SUSPENDED
|
|
|
|
Clearance Items
