EK Multi-Option Res150 Rev2 Ref: 555**WITH NEW REVISED BASE TO REDUCE WHIRLPOOL**High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!Technical data:170ml capacityInstallation height: 170mmDiameter: 50mmOne reservoir holder enclosed. Weight: 200g Price: £20.42 exc VAT (£23.99 Including VAT at 17.5%)
EK Multi-Option Res250 Rev2 Ref: 556**WITH NEW REVISED BASE TO REDUCE WHIRLPOOL**High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!Technical data:170ml capacityInstallation height: 250mmDiameter: 50mmOne reservoir holder enclosed. Weight: 250g Price: £22.12 exc VAT (£25.99 Including VAT at 17.5%)
EK Multi-Option Res400 Rev2 Ref: 174**WITH NEW REVISED BASE TO REDUCE WHIRLPOOL**High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!Technical data:500ml capacityInstallation height: 400mmDiameter: 50mm2 reservoir holder enclosed. Weight: 400g Price: £24.49 exc VAT (£28.78 Including VAT at 17.5%)
EK AntiCyclone plate Ref: 508Plate for the EK Multi-Option series reservoirs to reduce/elliminate whirlpool effect. Price: £2.30 exc VAT (£2.70 Including VAT at 17.5%)
Additional Clamp for EK Reservoirs Ref: 630Spare Reservoir Holder for reservoirs 50mm diameter. Price: £2.99 exc VAT (£3.51 Including VAT at 17.5%)
Brass T-Line Plug Ref: 193Brass plug to use as an alternative to the DD Fillport, used for plugging the ends of T-Line fill/bleed branches.Available for both 3/8 & 1/2" ID tubing. (7/16" users, you need the 1/2" version) Price: £2.00 exc VAT (£2.35 Including VAT at 17.5%)
Danger Den Fillport Ref: 443The Danger Den Fillport allows easy filling of a T-Line or reservoir system.Cut a 1" (2.54cm) hole in the top or side of the case. The cap is sealed with an o-ring as is the fitting inside the case.The aluminum fillport is bright dip anodized. The cap is coated and the wrench is included. The barb is for 1/2" ID TubingClick HERE for reviews of this product » Fillport Sketchup Component @ The SCC (Opens in New Window) Price: £6.90 exc VAT (£8.11 Including VAT at 17.5%)
Danger Den Fillport Reservoir Ref: 481Features:
Danger Den Bay Reservoir High-Density Polyethylene - 5.25" Ref: 17Danger Den Bay Reservoir (HDPE) is designed to fit into 5.25" drive bays. Manufactured with durable HDPE (high-density polyethylene) it is guaranteed not to crack, chip or break.One or two loop configuration. Step down design to help purge air faster. HDPE has superior chemical resistance. HDPE eliminates the possible cracking issues.Threaded inputs for 3/8NPT fittings, and is supplied with fittings for use with 1/2" ID Hose. Mounts easily in 5.25" Bays using threaded inserts. Use the top hole to fill. Ships with 3 fittings, 1 Port Plug, and 1 Fill Port Cap » Click HERE for Reviews of this Product (Opens in New Window) Price: £10.37 exc VAT (£12.18 Including VAT at 17.5%)
Danger Den Clear Bay Reservoir - 5.25" Ref: 213The Bay-Res is made of ¼" Cast Acrylic joined together with a water-tight seal that is pressure-leak tested. The Bay-Res reservoir was designed to be easily installed. Every case has a space for the reservoir. Installation is simple: slide the Bay-Res reservoirinto the CD-Rom bay, use the supplied screws to mount it into place, and connect the hoses. Use this product with our UV Water dye and a UV cathode for an unrivaled look. Bleed/Fill System: One of the most problematic steps in setting up and maintaining a watercooling system is the Fill/Bleed procedure; the Bay-Res was designed with this in mind: the front of the reservoir has a filling hole.Since the Bay-Res slides out easily, the fill/bleed process takes just a few minutes to perform. A screw-in plug is used to seal the fill hole. Features HiFlow fittings for 1/2" ID HoseNote: Always leak-test Watercooling equipment for at least 24 hours before installing in case. Price: £17.30 exc VAT (£20.33 Including VAT at 17.5%)
Danger Den Clear Dual Bay Reservoir - 2x5.25" Ref: 226The Bay-Res is made of ¼" Cast Acrylic joined together with a water-tight seal that is pressure-leak tested. The Bay-Res reservoir was designed to be easily installed. Every case has a space for the reservoir. Installation is simple: slide the Bay-Res reservoirinto the CD-Rom bay, use the supplied screws to mount it into place, and connect the hoses. Use this product with our UV Water dye and a UV cathode for an unrivaled look. Bleed/Fill System: One of the most problematic steps in setting up and maintaining a watercooling system is the Fill/Bleed procedure; the Bay-Res was designed with this in mind: the front of the reservoir has a filling hole.Since the Bay-Res slides out easily, the fill/bleed process takes just a few minutes to perform. A screw-in plug is used to seal the fill hole. Features HiFlow fittings for 1/2" ID HoseNote: Always leak-test Watercooling equipment for at least 24 hours before installing in case. » Danger Den Dual Bay Res Sketchup Component (Opens in New Window) Price: £19.30 exc VAT (£22.68 Including VAT at 17.5%)
XSPC Clear Bay Reservoir with Blue LED - 5.25" Ref: 428The Bay-Res is made of ¼" Cast Acrylic joined together with a water-tight seal that is pressure-leak tested. The Bay-Res reservoir was designed to be easily installed. Every case has a space for the reservoir. Installation is simple: slide the Bay-Res reservoirinto the CD-Rom bay, use the supplied screws to mount it into place, and connect the hoses. Use this product with our UV Water dye and a UV cathode for an unrivaled look. Bleed/Fill System: One of the most problematic steps in setting up and maintaining a watercooling system is the Fill/Bleed procedure; the Bay-Res was designed with this in mind: the front of the reservoir has a filling hole.Since the Bay-Res slides out easily, the fill/bleed process takes just a few minutes to perform. A screw-in plug is used to seal the fill hole. Features HiFlow fittings for 1/2" ID HoseNote: Always leak-test Watercooling equipment for at least 24 hours before installing in case. Price: £17.30 exc VAT (£20.33 Including VAT at 17.5%)
Clearance Items
