Thermal Compounds

Arctic Ceramique (2.5g)
Ref: 271

Ceramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.

Peak: -40°C to >180°C
Long-Term: -40°C to 140°C

2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads. (When measured with a calibrated thermal diode embedded in the CPU core.)

Ceramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.

The 2.7-gram Ceramique is the first product available in our proprietary thermal compound syringe. Our new syringe is more compact, easier to handle and dispenses a higher percentage of its content than standard industrial or medical syringes. The amount of compound remaining in the syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.

For reviews of this product click HERE


» Click Here for Application Instructions
(Opens in New Window)

Price: £2.99 exc VAT
(£3.51 Including VAT at 17.5%)

Arctic Silver 5 (3.5g)
Ref: 55

• Features:
  Contains 99.9% pure silver: Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.
• High-Density:
  Arctic Silver 5 contains over 88% thermally Conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.
• Controlled Triple-Phase Viscosity:
  Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
• Not Electrically Conductive:
  Arctic Silver 5 was formulated to conduct heat, not electricity. (While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)
• Absolute Stability:
  Arctic Silver 5 will not separate, run, migrate, or bleed.

Silicone Dielectric Compound - 5 grams *CLEARANCE*
Ref: 92

Dielectric compound is applied to electrical connections to prevent exposure to air and to keep them from corroding. It is the perfect solution for preventing condensation between the CPU and socket pins when cooling your CPU below the dew point.

Price: £0.50 exc VAT
(£0.59 Including VAT at 17.5%)

DangerDen Thermal Adhesive Pad
Ref: 475

2"x1" Thermal Adhesive Pad for afixing vreg and mosfet heatsinks etc

Price: £0.50 exc VAT
(£0.59 Including VAT at 17.5%)